Corner TV armoire can be expensive. Building a simple wooden booth can be achieved at a lower cost and ended according to your wishes. A two piece wooden TV stand supports most TV sizes and provides space for movies or gaming systems. Deliveries and wood required to build a wooden TV stand can be purchased at the building department store. Hardware can also be purchased at hardware or low cost stores.
12 Photos Gallery of: Building Corner TV Armoire
Set the top upright so the 43 1/2 inch edge is horizontal. Place a side piece (19 inches vertically vertical) under the top. That they are at even height and form a capital L. the top and left side of the corner TV armoire. Next you will attach left to top. Face overlap. Measure one inch down from the upper left corner and 1/2 inch from the top on the left side. Mark with a pencil.
Use a screwdriver bit to attach a screw through the pencil marker. You will attach three screws through the top to the top of the side panel. According to Bolt Depot, flathead wood screws provide a smooth surface. Measure one inch up from the top lower left corner TV armoire and half-inch in from the top is outside the left side. Screw a wooden screw through the top piece and into the upper edge of the side post. Measure, from the first screw, down 11 inches and half-inch from the outer edge. Screw a screw through the top into the upper edge of the left side. Wood L now has three screws.